Level 2 Correction Detail

LEVEL 2 CORRECTION DETAIL


This package is the next step up from our LEVEL 1 CORRECTION DETAIL and is designed to further finish and enhance the paint by removing the majority of defects present which are preventing the painbt from looking its best


A comprehensive 27 Step process in three stages designed to restore and enhance the vehicle’s appearance to an even greater extent than the LEVEL 1 DETAIL.  This includes a Two-Stage deep machine polish to remove medium to heavy swirls, scratches and blemishes, topped off with a protection of your choice.  This detail will enormously enhance the condition of the paintwork due to the additional machine polishing stage with quality polishes and will bring back a showroom finish and shine with paintwork that has clarity and is smooth to the touch.

PURPOSE:

A Paint Enhancement detail with a second Machine Polish Stage to bring back further clarity, depth, shine and protection to the paint.  Removes medium to heavy  imperfections.  A perfect detail for restoring older or neglected paintwork back to showroom condition with the aim of removing 90%+ of all defects

 

Cost:

From - £595.00    2-3  days

Depending on size of vehicle

Phone:    0800 860 6763

Email:      info@pristinedetailing.co.uk


We Recommend:

 

Considerable care time & effort will have been spent bringing life back to your paint, we recommend upgrading the protection to the KAMIKAZE Miyabi + ISM-Pro Glass Coating for up to 3 years protection

Or

Kamikaze's flagship ENREI Protection for up to 5 years protection!

 

Stage 1

Decontamination - Cleaning Stage


  • Wheel faces deep cleaned using an acid free cleaner solution and rinsed
  • Wheel arches degreased, cleaned and pressure washed
  • Vehicle rinsed with pressure washer to remove loose dirt 
  • Tar Spots removed
  • Iron Contamination/Fallout treated & removed
  • Badges and other tricky areas agitated with detailing brushes (or removed if required)*
  • Pre-wash with PH balanced snow foam and left to dwell
  • Vehicle rinsed with pressure washer
  • Exterior hand washed with shampoo using two bucket method and lamb’s wool mitt
  • Pressure washer rinse down
  • Vehicle dried with high quality towels and warm air
  • Paintwork and all Glass decontaminated using a Clay Bar
  • All door shuts cleaned

Stage 2

Correction Stage

  • Paintwork inspected and paint depth measurements taken
  • IPA wipe down to remove all traces of old wax or polish
  • Test area to establish best abrasive polish and process used to achieve results involving a suitable Compound to remove defects,
  • Followed by a fine Polishing stage to finish and enhance the paintwork for maximum gloss

Stage 3

Enhancement / Protection Stage

  • Additional wipe down with IPA to remove oils and polish residue
  • A Pre Wax cleaner applied first to prepare for the waxing stage - unless customer opting for a glass or ceramic coating, see below
  • Quality wax with high carnauba content applied by hand for a deep rich shine - unless customer opting for a glass or ceramic coating, see options box below.
  • Paintwork further treated to a spray on gloss enhancer forming an additional protective layer and hydrophobic properties.
  • Exterior trim cleaned, degreased, dressed and Protected
  • Glass cleaned, polished and sealed with a water repellant coating
  • Wheel arches dressed
  • Tyres dressed with high quality Si02 dressing
  • Wheels sealed with high temperature sealant to protect against road salt, brake dust and corrosion (upgrade available, see Bolt On Options below)

Welcome to

PRISTINEDETAILING

Please note:

Paint correction differs from vehicle to vehicle and is dependent on the level of defects present.  In all cases paint gloss and shine will be greatly enhanced but deep visible defects may persist if they are too heavy to be removed without a multiple step polishing procedure which might be beyond the purpose of this particular detail.

We are always happy to liaise with you prior to undertaking any work to determine the best possible course of action.  Any additional correction work will be charged accordingly with your full knowledge and agreement.


*Please be aware that new badges would need to be ordered from the relevant manufacturer at additional cost.  We are happy to obtain a quotation for your approval prior to going ahead.

RECOMMENDED PROTECTION UPGRADES:

 

  • 24 months Kamikaze Miyabi Ceramic Coating Protection - £99

 

  • 60 months KAMIKAZE Enrei Protection.  The ULTIMATE in modern coatings with unrivalled gloss and dirt repellancy - £285

 

  • 36 months KAMIKAZE Miyabi + ISM-Pro Glass Coat Sealant Protection - £255

 

  • 18-24 months KAMIKAZE Inifinity White Wax protection - from £75

 

  • 24 months KAMIKAZE Glass Protection - £70 all windows

 

  • 24 months KAMIKAZE Wheel Protection - £90 for all wheel faces, or £150 for faces and wheel inners. (requires wheels to be removed and deep cleaned prior to applying protection)

 

  • 3 year Fabric Hood Clean & Protection - £150

 

OTHER RECOMMENDED BOLT-ON OPTIONS:

 

  • Interior Deep Cleaning Detail - From £150A comprehensive and thorough deep cleaning of your vehicle interior.  This detail can take up to an entire day to complete depending on size and condition of interior.  Additional hours may be required to achieve desired resut, why not book a no obligation inspection to determine level of cleaning required.

 

  • Engine Bay Detail - From £35 depending on size and condition of engine bay & desired result.

 

  • Headlight Restoration - £35 per headlight.  A polymer sealant is included in the price. 
  • Headlight Restoration Professional - £70 per headlight.  Yhis includes a Nano-technology coating which requires a 24 hr curing time

 

DETAILING STUDIO

Unit D3, Cumberland Road Trading Est

Cumberland Road

Loughborough

Leicestershire

LE11 5DF

 

Tel: 0800 860 6763

Mob: 07393 366603

 

Email: info@pristinedetailing.co.uk

 

 

 

 

 

 



Copyright @ 2018 All Rights Reserved